X

Other RSW Considerations

Judging Weldability Using Carbon Equivalence (CE)

Existing Carbon Equivalent (CE) formulas for Resistance Spot Welding (RSW) of steels do not adequately predict weld performance in AHSS. Weld quality depends on variables such as thickness, strength, loading mode, and weld size. New formulae are proposed by various entities. Because there is no universally accepted formula, use of any one CE equation is not possible and users should develop their own CE equations based on their experience.

Part Fit-Up

Resistance welding depends on the interfacial resistance between two sheets. Good and consistent fit-up of parts is important to all resistance welding. Part fit-up is even more critical to the welding of AHSS due to increased YS and greater springback. In case of poor or inconsistent part fit-up, large truncated cone electrodes are recommended for both AHSS and conventional steels. The larger cap size will have large current range, which might compensate for the poor part fit-up. Also, progressive electrode force and upslope can be used to solve poor part fit-up.

Related Posts
Filter by
Post Page
Blog RSW Modelling and Performance RSW Parameter Guidelines RSW of Dissimilar Steel Resistance Spot Welding Joining Dissimilar Materials Resistance Welding Steel to Aluminium main-blog
Sort by

LME Simulation During RSW

Modern car bodies today are made of increasing volumes of Advanced High-Strength Steels (AHSS), the superb

18

RSW of 22MnB5 at Overlaps

This article summarizes a paper entitled, “RSW of 22MnB5 at Overlaps with Gaps-Effects, Causes, and

18

RSW of 3T Stack Up

This article is the summary of a paper entitled, “HAZ Softening of RSW of 3T Dissimilar Steel Stack-up”,

18

RSW Modelling Process and Performance

The advantages of numerical simulations for

18

RSW of Advanced High-Strength Steels

In general, if any type of AHSS [

18

Ultrasonic Assisted RSW

Recently research at the Ohio State

18

Direct RSW of Aluminium to Steel

Figure 1 shows a typical cross-section of a

18

Key Issues: RSW Steel and Aluminium Joints

Among various dissimilar material combinations, Al-steel is one of the most desirable combination. This section will

18

Modelling RSW of AHSS

Modelling resistance spot welding can help to understand the process and drive innovation by asking the right

10

Kate Hickey:
Related Post