Citation:
A-74. M. Alsmann, M. Goede, S. Kulp, M. Lalla, J. Patak and F. Russ, “Hot Forming – State of the Art and Future Reuqirements at Volkswagen,” Presented at Materials in Car Body Engineering 2014, May 13-14, Bad Nauheim, Germany, 2014.
A-74. M. Alsmann, M. Goede, S. Kulp, M. Lalla, J. Patak and F. Russ, “Hot Forming – State of the Art and Future Reuqirements at Volkswagen,” Presented at Materials in Car Body Engineering 2014, May 13-14, Bad Nauheim, Germany, 2014.
H-66. G.T. Halmos (Editor) Roll Forming Handbook (1st ed.). CRC Press, 2005. doi.org/10.1201/9781420030693.
G.T. Halmos (Editor) Roll Forming Handbook (1st ed.). CRC Press, 2005.doi.org/10.1201/9781420030693
Citation U-13. Peter Ulintz, Precision Metalforming Association. This section originally appeared in the September 2023…