Y-4

Y-4. M. Yasuyama, K. Ogawa, and T. Taka, “Spot welding of aluminium and steel sheet with an insert of aluminium clad steel sheet: Dissimilar metal joining of aluminium and steel sheet (1st Report)”, Weld. Int., Vol. 10, No. 12, pp. 963–970, 1996, doi.org/10.1080/09507119609549121.

Filter by

Post Page

Joining Dissimilar Materials Laser Welding Resistance Welding Steel to Aluminium homepage-featured-top main-blog Blog Citations

Sort by

Given the use of many different metals in the Body in White construction, it is important to understand the effects

In order to improve the microstructure and mechanical properties of Aluminium/Steel resistance spot weld joints, Qiu

In order to reduce welding current and improve heat balance during resistance spot welding of aluminium alloy to

In order to reduce the thickness of brittle intermetallic compound (IMC) formed at Aluminium/Steel interface to

Figure 1 shows a typical cross-section of a

Among various dissimilar material combinations, Al-steel is one of the most desirable combination. This section will

The challenges to spot welding of aluminum compared to steel include a tenacious and rapidly forming oxide layer of

Citation

W-15 »

« O-3

Categories: Citations

Kate Hickey:

T-48
Citation T-48. “Body Structure Materials and Allowed Operations” section in the “Model Y Collision Repair…
W-11
Citation W-11. WorldAutoSteel. (2010) “FutureSteelVehicle Results and Reports & Cost Models.”
J-25
Citation J-25: Japan European New Car Assessment Program