F-26

Citation:

F-26. P. Fischer, D. Harsch, J. Heingärtner, Y. Renkci, and P. Hora, “Inline feedback control for deep drawing applications,” Presented at International Deep Drawing Research Group – 2016, IOP Conf. Series: Materials Science and Engineering 159 (2016) 012006, doi:10.1088/1757-899X/159/1/012006.

Filter by

Post Page

Forming Modes Tool & Die Professionals homepage-featured-top main-blog Blog Blanking Cutting-Blanking-Shearing-Trimming Simulation Tailored Products Citations Springback Press Hardened Steels

Sort by

Drawing

Drawing is the sheet metal forming process where the punch that creates the part shape forces the sheet metal to

Die-Free Blanking of Class A Quality & Structural Parts

You’ll find this content as part of our page on

Conventional Rule-of-Thumb Calculations Lead to Inaccurate Press Tonnage Predictions

The rule of thumb estimates used in 1989 during my internship with an automotive stamping supplier were simple

Servo Press Force and Energy Considerations When Working With AHSS

Advanced High-Strength Steel (AHSS) products have significantly different forming characteristics and these

Simulation Inputs

Yield Criteria Hardening

Vision for Industry 4.0 in Sheet Metal Forming

There is interest in the sheet metal industry on how to adopt Industry 4.0 into their legacy forming practices to

Tailored Products

Types of Tailored

P-4

Citation: P-4. F. Pinard, L. Cretteur, and J. Y. Sener, “State of th

Correcting Springback

Correcting Springback: Overview Correcting

PHS Production Methods

Direct Process

F-27 »

« F-25

Categories: Citations

Tags: D. HarschJ. HeingärtnerP. FischerP. HoraY. Renkci

Angela Erhart:

T-48
Citation T-48. “Body Structure Materials and Allowed Operations” section in the “Model Y Collision Repair…
W-11
Citation W-11. WorldAutoSteel. (2010) “FutureSteelVehicle Results and Reports & Cost Models.”
J-25
Citation J-25: Japan European New Car Assessment Program