AHSS Insights Blog
Do Residual Elements from EAF Scrap Affect Spot Weldability? Part 1: Welding Current Range and Hardness
This article, contributed by ArcelorMittal, presents the first part of an in-depth study on the effects of residual elements such as Copper, Tin, Nickel and Chromium on the resistance spot weldability of automotive steels. Residual elements (also called tramp...
Advanced HSLA Steels: Going Beyond 550 MPa Yield Strength
Advanced High Strength Steels are a common approach that autobody engineers use for applications requiring grades with yield strength exceeding 500 MPa. Steelmakers are increasingly offering alternatives based on High Strength Low Alloy Steel production...
Welding Distortion Simulation: Reducing Risk in Automotive Body-in-White Production
In automotive pre-production, building physical prototypes to test weld distortion is both costly and time-consuming. These distortions can create major challenges during production ramp-up, including poor part tolerances and visible warpage in outer panels. Welding...
High Strain Rate Testing of Advanced High-Strength Steels
WorldAutoSteel periodically invites outside experts to contribute their knowledge on pertinent topics. Here, Danny Schaeffler, President of Engineering Quality Solutions and our Technical Editor for Metallurgy and Forming, worked with Trey Leonard, Ph.D. Founder...
Micro-alloying of GMAW Filler Wire Increases Mechanical Properties and Corrosion Resistance in AHSS Automotive Welding
Introduction: Welding with Micro-Alloyed Wire In automotive vehicle assembly, gas metal arc welding (GMAW) plays an important role: Unlike the dominant resistance spot welding, it is not used as a bulk joining process, but rather specifically to...
Case Studies in AHSS Alloy Selection
How Advanced High-Strength Steels Solve Cold Stamping Challenges in Automotive Body Structures Introduction In the automotive industry, manufacturing complex, high-strength deep-drawn parts using cold forming processes can create new challenges not previously...





