B-58

Citation:

B-58. A. Bachmaier, K. Hausmann, D. Krizan, and A. Pichler, “Development of TBF Steels with 980 MPa Tensile Strength for Automotive Applications: Microstructure and Mechanical Properties,” Proceedings of the International Symposium on New Developments in Advanced High Strength Sheet Steels, Vail, CO, USA, 2013, doi.org/10.13140/RG.2.2.24907.80169;

Filter by

Post Page

homepage-featured-top main-blog Steel Grades AHSS Blog Joining Joining Dissimilar Materials 1stGen AHSS Press Hardened Steels Forming Metallurgy 3rdGen AHSS Lower Strength Steels Resistance Spot Welding Mechanical Properties

Sort by

Resistance Spot Welding with Advanced High-Strength Steels: Cold Stamped and Hot Formed

The discussions relative to cold stamping are applicable to any forming operation occurring at room temperature

Using Martensitic Steels as an Alternative to Press Hardening Steel – Laboratory Evaluations

Our colleagues at JFE Steel recently provided us with a new case study based on laboratory evaluations they

Press Hardened Steels

Introduction

Press Hardened Steels Primer

PHS and PQS Overview A Brief Overview of Press Hardening Press hardening (also

Defining Steels

Basis Nomenclature

3rd Generation Steels