B-32

Citation:

B-32. D. Bhattacharya, “Development and Application of Press-Hardened Steels (PHS) and 3rdGeneration AHSS Steels in the Automotive Industry,” Presented at PHS Suppliers Forum, September 19, Troy, MI, 2019.

Filter by

Post Page

homepage-featured-top main-blog Blog Steel Grades AHSS 1stGen AHSS Press Hardened Steels Forming Metallurgy 3rdGen AHSS Lower Strength Steels Resistance Spot Welding Joining Laser Welding Production Managers Tool & Die Professionals 2ndGen AHSS

Sort by

Using Martensitic Steels as an Alternative to Press Hardening Steel – Laboratory Evaluations

Our colleagues at JFE Steel recently provided us with a new case study based on laboratory evaluations they

Press Hardened Steels

Introduction

Press Hardened Steels Primer

PHS and PQS Overview A Brief Overview of Press Hardening Press hardening (also commonly

Defining Steels

Basis Nomenclature

3rd Generation Steels

TRIP-Assisted Bainitic Ferrite (TBF) and Carbide-Free Bainite

Mild Steels

Metallurgy of Mild Steels Mild steels are low carbon steels with no alloying elements added for substantial

Case Study: Upgraded Tool Steels for Upgraded Sheet Metal Forming

We thank

RSW of Advanced High-Strength Steels

In general, if any type of AHSS [

Formation mechanism of LME in laser lap welding of zinc-coated 3rd Gen steels

In this study by Shanghai Jiao Tong University

Stronger AHSS Knowledge Required for Metal Stampers

This month’s blog was contributed by

Trackbacks/Pingbacks

Coatings for PHS - AHSS Guidelines - […] elongation and bending angle, may be guaranteed only after bake hardening, as shown in Figure 7.B-32 Paint baking is…
PHS Aluminium-Based Coatings - AHSS Guidelines - […] elongation and bending angle, may be guaranteed only after bake hardening, as shown in Figure 7.B-32 Paint baking is…
PHS Grades - AHSS Guidelines - […] only after paint baking cycle, and the parts made with this grade may be brittle before paint bake.B-32 In…

Citation:

Trackbacks/Pingbacks

Submit a Comment Cancel reply

Search