B-19

Citation:

B-19. E. Billur, “12 – Hot formed steels,” in Automotive Steels: Design, Metallurgy, Processing and Applications, R. Rana and S. B. Singh, Eds., Woodhead Publishing, 2017, pp. 387-411, elsevier.com/books/automotive-steels/rana/978-0-08-100638-2;

Filter by

Post Page

homepage-featured-top main-blog Steel Grades AHSS Blog Joining Joining Dissimilar Materials 1stGen AHSS Press Hardened Steels Forming Metallurgy 3rdGen AHSS Lower Strength Steels Resistance Spot Welding Laser Welding

Sort by

Resistance Spot Welding with Advanced High-Strength Steels: Cold Stamped and Hot Formed

The discussions relative to cold stamping are applicable to any forming operation occurring at room temperature

Using Martensitic Steels as an Alternative to Press Hardening Steel – Laboratory Evaluations

Our colleagues at JFE Steel recently provided us with a new case study based on laboratory evaluations they

Press Hardened Steels

Introduction

Press Hardened Steels Primer

PHS and PQS Overview A Brief Overview of Press Hardening Press hardening (also

Defining Steels

Basis Nomenclature

3rd Generation Steels

TRIP-Assisted Bainitic Ferrite (TBF) and Carbide-Free Bainite

Mild Steels

Metallurgy of Mild Steels Mild steels are low carbon steels with no alloying elements added for substantial

Case Study: Upgraded Tool Steels for Upgraded Sheet Metal Forming

We thank

RSW of Advanced High-Strength Steels

In general, if any type of AHSS [

Formation mechanism of LME in laser lap welding of zinc-coated 3rd Gen steels

In this study by Shanghai Jiao Tong University

M-25 »

« H-30

Categories: Citations

Tags: E. Billur

Angela Erhart:

T-48
Citation T-48. “Body Structure Materials and Allowed Operations” section in the “Model Y Collision Repair…
W-11
Citation W-11. WorldAutoSteel. (2010) “FutureSteelVehicle Results and Reports & Cost Models.”
J-25
Citation J-25: Japan European New Car Assessment Program