P-17

Citation:

P-17. I. Paetzold, M. Feistle, R. Golle, W. Volk, A. Frehn and R. Ilskens, “Determination of the minimum possible damage due to shear cutting using a multi-stage shear cutting process,” IOP Conf. Series: Materials Science and Engineering 418 (2018) 012070, doi:10.1088/1757-899X/418/1/012070.

Filter by

Post Page

Cutting Cutting-Blanking-Shearing-Trimming Formability homepage-featured-top main-blog Blog Joining Joining Dissimilar Materials Resistance Welding Processes Resistance Spot Welding RSW of Dissimilar Steel RSW Modelling and Performance Production Managers Tool & Die Professionals Steel Grades AHSS 1stGen AHSS 3rdGen AHSS 2ndGen AHSS Blanking Resistance Welding Steel to Aluminium Simulation

Sort by

Cutting, Blanking, Shearing & Trimming

Edge Ductility Measurements

Shear Fracture

Automotive product designers target small radii for springback control, sectional stiffness, packaging constraints,

Shear Affected Zone

A cut edge has four distinct zones with different characteristics: Rollover – The p

Resistance Spot Welding AHSS to Magnesium

This blog is a short summary of a published comprehensive research work titled:

Stronger AHSS Knowledge Required for Metal Stampers

This month’s blog was contributed by

Die-Free Blanking of Class A Quality & Structural Parts

You’ll find this content as part of our page on

What are 3rd Gen AHSS?

One of the tasks we took great care in completing during the update of the AHSS Application Guidelines was to

Conventional Rule-of-Thumb Calculations Lead to Inaccurate Press Tonnage Predictions

The rule of thumb estimates used in 1989 during my internship with an automotive stamping supplier were simple

Process, Microstructure and Fracture Mode of Thick Stack-Ups of Aluminum Alloy to AHSS Dissimilar Spot Joints

This article summarizes a paper entitled, “Process, Microstructure and Fracture Mode of Thick Stack-Ups of

Simulation Inputs

Yield Criteria Hardening

A-34 »

« Inventing the First AHSS Road Bike

Categories: Citations

Tags: A. FrehnI. PaetzoldM. FeistleR. GolleR. IlskensW. Volk

Angela Erhart:

T-48
Citation T-48. “Body Structure Materials and Allowed Operations” section in the “Model Y Collision Repair…
W-11
Citation W-11. WorldAutoSteel. (2010) “FutureSteelVehicle Results and Reports & Cost Models.”
J-25
Citation J-25: Japan European New Car Assessment Program