J-19

Citation:

J-19. P.O. Judt, A. Ricoeur, and G. Linek, “Crack paths at multiple-crack systems in anisotropic structures: simulation and experiment,” Procedia Materials Science, Volume 3, 2014, Pages 2122-2127, doi.org/10.1016/j.mspro.2014.06.343.

Filter by

Post Page

Laser Welding Testing and Characterization RSW Joint Performance Testing homepage-featured-top main-blog Steel Grades AHSS Blog Joining Joining Dissimilar Materials Forming Springback 3rdGen AHSS Roll Forming Roll Stamping Press Hardened Steels Production Managers Tool & Die Professionals 1stGen AHSS 2ndGen AHSS Metallurgy Lower Strength Steels Conventional HSS Resistance Welding Steel to Aluminium

Sort by

Improvement of Delayed Cracking in Laser Weld of AHSS and 980 3rd Gen AHSS

This article is a summary of the paper entitled, “IMPROVEMENT OF DELAYED CRACKING IN LASER WELD OF AHSS AND

Hot cracking investigation in HSS laser welding with multi-scale modelling approach

This article summarizes the findings of a paper entitled, “Hot cracking investigation during laser welding of h

Delayed Cracking (Hydrogen Embrittlement)

Delayed cracking caused by hydrogen embrittlement results in decreased toughness, ductility, and load-bearing

Analyze Hydrogen Induced Cracking Susceptibility in Resistance Spot Welds

This articles summarizes a paper entitled, “New Test to Analyze Hydrogen Induced Cracking Susceptibility in

Resistance Spot Welding with Advanced High-Strength Steels: Cold Stamped and Hot Formed

The discussions relative to cold stamping are applicable to any forming operation occurring at room temperature

How Steel Properties Influence the Roll Forming Process

You’ll find this content as part of our p

Stronger AHSS Knowledge Required for Metal Stampers

This month’s blog was contributed by

Talk Like a Metallurgist

Roll Forming

Process, Microstructure and Fracture Mode of Thick Stack-Ups of Aluminum Alloy to AHSS Dissimilar Spot Joints

This article summarizes a paper entitled, “Process, Microstructure and Fracture Mode of Thick Stack-Ups of

S-51 »

« S-79

Categories: Citations

Tags: A. RicoeurG. LinekP.O. Judt

Angela Erhart:

T-48
Citation T-48. “Body Structure Materials and Allowed Operations” section in the “Model Y Collision Repair…
W-11
Citation W-11. WorldAutoSteel. (2010) “FutureSteelVehicle Results and Reports & Cost Models.”
J-25
Citation J-25: Japan European New Car Assessment Program