A-8
Citation: A-8. ArcelorMittal, "Laser Welded Blanks,” Online, https://automotive.arcelormittal.com/tailored_blanks_home/LWB_home/laser_welded_blanks, retrieved 12 May 2021.
L-5
Citation: L-5. P. Larour, J. Freudenthaler, M. Kerschbaum, and D. Dolzer, “Edge crack sensitivity versus tensile local ductility of AHSS…
A-7
Citation: A-7. F. Abu-Farha, “Destroying Materials is Critical to Saving Lives,” Quality Magazine, August 3, 2020.
B-61
Citation: B-61. E. Billur, “Heating Helps Forming, Part 1: Hot Stamping of High-Strength Steels,” MetalForming Magazine, August 2020, Precision Metalforming…
Forming and Formability of AHSS
Introduction Approaches for forming higher strength steels evolved with the commercialization of increased strength levels of High Strength Low Alloy…
Microstructural Effects of Adding Colloidal Graphite to Al-Si-Coated PHS
Optimizing weld morphology and mechanical properties of laser welded Al-Si coated 22MnB5 by surface application of colloidal graphite Researchers…
K-51
Citation: K-51. M. Shehryar Khan, M.H. Razmpoosh, A. Macwan, E. Biro, Y. Zhou, ”Optimizing weld morphology and mechanical properties of…
Formation mechanism of LME in laser lap welding of zinc-coated 3rd Gen steels
In this study by Shanghai Jiao Tong University and General Motors Company on liquid metal Embrittlement (LME)Z-11, hot dipped 1.2mm…
Z-11
Citation: Z-11. Yuanjing Zhu, Hui-Ping Wang, Yaqi Wang, Yu Hao, Blair E. Carlson, Fenggui Lu, “Formation mechanism of liquid metal…
Effect of GA Coating Weight on PHS
This studyR-25, conducted by the Centre for Advanced Materials Joining, Department of Mechanical & Mechatronics Engineering, University of Waterloo, and…