Z-15
Citation: Z-15. D.J. Zhou, and K. Kannan, “The Effect of Combination Beads on Springback: Experimental Study & Virtual Study", Presented at…
Z-14
Citation: Z-14. M. Zoernack, “New Advancements of Cold Forming TRB® AHSS,” Presented at 2021 Great Designs in Steel, Sponsored by…
Press Requirements
Characteristics of Servo Presses Advantages of Servo Presses Press Force and Press Energy Forming Process Simulation Setting Draw Beads with…
Hole Expansion Testing
The term local formability describes when part and process design, in addition to sheet metal properties like strength and elongation,…
Springback
Origins of Springback Types of Springback Case Study in Springback Prediction Key Points Decades ago, the major concern in…
Elastic Modulus
Elastic Modulus (Young’s Modulus) When a punch initially contacts a sheet metal blank, the forces produced move the sheet metal…
A-76
Citation: A-76. E. Atzema, M. Borsutzki, M. Braun, S. Brockmann, M. Bulter, B. Carlsson, P. Larour, and A. Richter, “A…
K-45
Citation: K-45. T. Kondo, “The highest strength (1.5GPa) steel application for cold stamping parts” presented at Materials in Car Body…
Dual Phase
Dual Phase (DP) steels have a microstructure consisting of a ferritic matrix with martensitic islands as a hard second phase,…