Citation: P-4.  F. Pinard, L. Cretteur, and J. Y. Sener, “State of the art regarding design, modeling and processing of…

Citation: D-2.   Deutsches Institut fur Normung and Euronorm, DIN EN 10359, "Laser welded tailored blanks - Technical delivery conditions".…

Citation: L-61.  J. Lucas, “2021 Acura TLX", Presented at 2021 Great Designs in Steel, Sponsored by American Iron and Steel…

Introduction Laser Welded Tailored Blanks (Tailor Welded Blanks) Tailor Rolled Blanks Patchwork Blanks Tailored Properties   Introduction Some automotive components…

Citation: F-42.  R. Funada, "Maximizing Lightweighting in Steel Automotive Bodies and Frames with STAF (Steel Tube Air Forming)", Presented at…

Correcting Springback: Overview Correcting Springback by Changing the Elastic Stress Distribution: Post Stretch (Stake Beads) Correcting Springback by Changing the…

Direct Process Indirect Process Hybrid Process Pre-Cooled Direct Process Multi-Step Process Roll Form PHS Form Fixture Hardening Form Blow Hardening…

Edge Ductility Measurements Cut Edge Quality Cutting Clearances: Burr Height and Tool Wear Cutting Clearances: General Recommendations Punch Face Design…

Overview Uncoated Blanks Aluminium-Based Coatings Zinc-Based Coatings Varnish Coatings   Overview The initial press hardening steels of the 1970s were…

Citation: L-60.  Q. Lu, S. Tedesco, M. Shi, J. Coryell, and J. Wang, “New Generation Oxidation Resistance (Coating Free) Press…