L-79. P Larour, J Hinterdorfer, L Wagner, J Freudenthaler, A Grünsteidl, and M Kerschbaum, “Stretch flangeability of AHSS automotive grades versus cutting tool clearance, wear, angle and radial strain gradients,” International Deep-Drawing Research Group Conference (IDDRG 2022), IOP Conf. Series: Materials Science and Engineering, 1238 (2022) 012041, http://doi.org/10.1088/1757-899X/1238/1/012041
L-75. Patrick Larour, Wolfgang Lumetzberger and Leopold Wagner, “Analysis of experimental scattering sources in local ductility measurement from flat tensile test sample fracture surfaces,” IDDRG 2025, MATEC Web of Conferences 408, 01082 (2025); https://doi.org/10.1051/matecconf/202540801082.
L-72. LINGBEEK Roald, LAROUR Patrick, RUCK Astrid, BEIER Thorsten, CORNETTE Dominique, SCHADOW Thomas, WESTHÄUSER Sebastian, “Local ductility in steel sheet, towards a practical and robust measurement method,” Materials Research Proceedings, Vol. 41, pp 999-1008, 2024; https://doi.org/10.21741/9781644903131-110
S-127. Matthias Schneider, Thorsten Beier, Patrick Larour, Eisso Atzema, Matti Teschner, Sebastian Westhäuser, Martin Bülter, Michael Braun, Thomas Müller, Arno Richter, and Stefanie Brockmann, “Consideration of the reduced formability of a shear cut edge in numerical forming simulation of steel sheets,” 5th International Conference of Steels in Cars and Trucks 2017, Amsterdam-Schiphol, Netherlands, June 2017.
F-47. D. Frómeta, A. Lara, S. Molas, D. Casellas, J. Rehrl, C. Suppan, P. Larour, and J. Calvo, “On the correlation between fracture toughness and crash resistance of advanced high strength steels,” Eng. Frac. Mech. 205 (2019) 319-332; https://doi.org/10.1016/j.engfracmech.2018.10.005.