MENU
MENU
Home
About
In Dedication
Submitting Your Content
Metallurgy
Defining Steels
Steel Grades
Coatings
Coatings for PHS
Coating Friction
Microstructural Components
Forming
Forming and Formability of AHSS
Mechanical Properties
Elastic Modulus
Yield Strength
Tensile Strength
Total Elongation
Uniform Elongation
N-Value
R-Value
M-Value
Testing & Characterization
Tensile Testing
Hole Expansion Testing
Improvement by Metallurgical Approaches
Edge Stretching Tests
Bend Testing
Bulge and Dome Testing
Friction and Friction Testing
High Strain Rate Testing
Delayed Cracking (Hydrogen Embrittlement)
Formability
Forming Modes
Stretching
Bending
Drawing
Forming Limit Curves (FLC)
Circle Grid Strain Analysis (CGSA)
Non-Linear Strain Paths (Stress-Based FLCs)
Engineering Stress-Strain vs. True Stress-Strain
Global vs Local Formability
Necking
True Fracture Strain
Shear Fracture
Springback
Correcting Springback
Cutting, Blanking, Shearing & Trimming
Laser Blanking
Shear Affected Zone
Tooling and Die Wear
Lubrication
Coil Processing:Straightening & Leveling
Press Hardened Steels Primer
PHS Production Methods
PHS Simulation
PHS Tailored Products
PHS Automotive Applications and Usage
Tailored Products
PHS Tailored Products
Tube Forming
Hydroforming
Roll Forming
Simulation Overview
Simulation Inputs
Structural Performance
Crash Management
Fatigue
Press Requirements
Press Tonnage Predictions
Quality Control
Industry 4.0 and AHSS Applications
Additive Mfg for Sheet Metal Forming Tools
Joining
Introduction
Resistance Welding Processes
Resistance Spot Welding
RSW of AHSS
RSW Parameter Guidelines
AHSS and Electrode Geometry
Coating Effects
Other RSW Considerations
Spot Weld Strength Improvement by PWHT
Post-Heat Conduction CTS Improvement
RSW of 22MnB5 at Overlaps
Manufacturing Issues
RSW of Dissimilar Steel
RSW of 3T Stack Up
RSW of 4T Stack Up
Higher than Expected Strengths
RSW Joint Performance and Testing
Weld Testing and Fracture Modes
Spot Welds Fatigue Strength
Embrittlement Phenomenon
Analyze Hydrogen Induced Cracking Susceptibility
Liquid Metal Embrittlement Study
RSW Modelling Process and Performance
RSW of 3T Stack Up
RSW Failure Prediction
LME Simulation During RSW
Modelling RSW of AHSS
Projection Welding
HS Boron Methodologies
Weld Quality with Modular Weld Head
Arc Welding Processes
Gas Metal Arc Welding
Fatigue of GMAW-P Lap Joints
Role of Coatings in Defect Formation AHSS welds
HAZ Properties of GMAW DP 600
GMAW of Dissimilar AHSS Sheets
High Energy Density Welding Processes
Laser Welding
Laser Welding Processes and Applications
Effect GA-Coating Evolution PHS
Effect GA-Coating Weight PHS
LME in Zn-coated 3rd Gen steels
Adding Colloidal Graphite to Al-Si-Coated PHS
Hybrid Laser-Arc Welding (HLAW) Pore Formation and Prevention
Hot cracking investigation in HSS laser welding with multi-scale modelling approach
Improvement of Delayed Cracking in Laser Weld of AHSS and 980 3rd Gen AHSS
Solid State Welding
Friction Welding Processes
FSSW Method for Joining Ultra-Thin Steel Sheet
High Frequency Tube/Pipe Welding
HF Welding Parameters and Procedures
Magnetic Pulse Welding
Adhesive and Mechanical Joining
Hybrid Welding Processes
Hybrid Welding Procedures
Mechanical Joining
Joining Dissimilar Materials
Key Issues: RSW Steel and Aluminium Joints
Direct RSW of Aluminium to Steel
Capacitive Discharge Welding
Aluminium/Steel Using Interlayer
Aluminium/Steel Using Cover Plates
REM of Aluminium/Steel
Ultrasonic Assisted RSW
Process, Microstructure and Fracture Mode of Thick Stack-Ups of Aluminum Alloy to AHSS Dissimilar Spot Joints
Solid State Welding of Steel to Aluminum
Joint Strength in Laser Welding of DP to Aluminium
Automotive Welding Process Comparisons
AHSS Insights Blog
Search
Tutorials
Help
Subscribe
E-2
Citations
Citation:
E-2.
Courtesy of
Engineering Quality Solutions, Inc.
Search
Search for:
>
View Steel Grades