F-23

Citation:

F-23. J. Frei, M. Biegler, M. Rethmeier, C. Böhne, and G. Meschut, “Investigation of liquid metal embrittlement of dual phase steel joints by electro-thermomechanical spot-welding simulation,” Science and Technology of Welding and Joining, vol. 90, pp. 1–10, 2019.

Filter by

Post Page

Tool & Die Professionals homepage-featured-top main-blog Steel Grades AHSS Blog Joining Resistance Spot Welding RSW of Dissimilar Steel Automotive Welding Process Comparison Laser Welding High Energy Density Welding Joining Dissimilar Materials Projection Welding Solid State Welding Steel to Aluminium Arc Welding

Sort by

Resistance Spot Welding: 5T Dissimilar Steel Stack-ups for Automotive Applications

Urbanization and waning interest in vehicle ownership point to new transport opportunities in megacities around the

Resistance Spot Welding: 3T and 4T Dissimilar Steel Stack-ups for Automotive Applications

Car body-in-white (

Hot cracking investigation in HSS laser welding with multi-scale modelling approach

This article summarizes the findings of a paper entitled, “Hot cracking investigation during laser welding of h

Hybrid Laser-Arc Welding (HLAW) Pore Formation and Prevention

This is a summary of a paper by M. Mazar Atabaki, et al, entitled, “Pore formation and its mitigation during

Formation mechanism of LME in laser lap welding of zinc-coated 3rd Gen steels

In this study by Shanghai Jiao Tong University

Microstructural Evolution and Effect on Joint Strength in Laser Welding of DP to Aluminium

Given the use of many different metals in the Body in White construction, it is important to understand the effects

Projection Welding

As with resistance spot welding in automotive applications, projection welding also is used to join two overlapping

Solid State Welding of Steel to Aluminum

Introduction

Automotive Welding Process Comparisons

Introduction

Gas Metal Arc Welding

Gas Metal Arc Welding: Introduction

Trackbacks/Pingbacks

Modelling RSW of AHSS - AHSS Guidelines - […] Figure 2: Temperature measurement with thermocouples during welding and the results. The simulated temperature development is compared to the…
Modelling RSW - AHSS Guidelines - […] Figure 2: Temperature measurement with thermocouples during welding and the results. The simulated temperature development is compared to the…
Welding Simulation for AHSS: LME During Resistance Spot Welding - AHSS Guidelines - […] For more information on this topic, see the paper, co-authored by Fraunhofer and LWF Paderborn, documented in Citation F-23.…

Citation:

Trackbacks/Pingbacks

Submit a Comment Cancel reply

Search