F-26

Citation:

F-26. P. Fischer, D. Harsch, J. Heingärtner, Y. Renkci, and P. Hora, “Inline feedback control for deep drawing applications,” Presented at International Deep Drawing Research Group – 2016, IOP Conf. Series: Materials Science and Engineering 159 (2016) 012006, doi:10.1088/1757-899X/159/1/012006.

 

Related Posts
Filter by
Post Page
Forming Modes homepage-featured-top main-blog Mechanical Properties AHSS Blog Tool & Die Professionals Blanking Cutting-Blanking-Shearing-Trimming Simulation Tailored Products Citations Springback
Sort by

Drawing

Drawing is the sheet metal forming process where the punch that creates the part shape forces the sheet metal to

18

Tensile Testing: Engineering Stress-Strain Curves vs. True Stress-Strain Curves

Tensile testing is one of the most basic formability characterization methods

8

Die-Free Blanking of Class A Quality & Structural Parts

You’ll find this content as part of our page on

8

Conventional Rule-of-Thumb Calculations Lead to Inaccurate Press Tonnage Predictions

The rule of thumb estimates used in 1989 during my internship with an automotive stamping supplier were simple

8

Servo Press Force and Energy Considerations When Working With AHSS

Advanced High-Strength Steel (AHSS) products have significantly different forming characteristics and these

8

Simulation Inputs

Yield Criteria Hardening

8

Vision for Industry 4.0 in Sheet Metal Forming

There is interest in the sheet metal industry on how to adopt Industry 4.0 into their legacy forming practices to

8

Tailored Products

Types of Tailored

8

P-4

Citation: P-4.  F. Pinard, L. Cretteur, and J. Y. Sener, “State of th

8

Correcting Springback

Correcting Springback: Overview Correcting

8