• Home
  • About
    • Rationale
      • ULSAB/Early Steel Consortia
      • FutureSteelVehicle
      • Steel E-Motive
      • Emissions/Life Cycle Assessment
      • Performance Advantages
      • Current Vehicle Examples
    • In Dedication
  • Metallurgy
    • Defining Steels
      • Defining Steels Overview
    • Steel Grades
      • Steel Grades Overview
      • Grade Development Success Stories
      • Case Studies in Alloy Selection
    • Coatings
      • Coatings Overview
      • Coatings for PHS
      • Coating Friction
      • Galvanizability of AHSS
    • Microstructural Components
      • Microstructural Components Overview
  • Forming
    • Forming and Formability of AHSS
      • Forming And Formability Overview
    • Forming Strategies and Solutions
      • Forming Strategies and Solutions Overview
    • Mechanical Properties
      • Mechanical Properties Overview
      • Elastic Modulus
      • Yield Strength
      • Tensile Strength
      • Total Elongation
      • Uniform Elongation
      • N-Value
      • R-Value
      • M-Value
    • Testing & Characterization
      • Testing And Characterization Overview
      • Tensile Testing
      • Hole Expansion Testing
        • Improvement by Metallurgical Approaches
        • Edge Stretching Tests
      • Fracture Toughness
      • Bend Testing
      • Bulge and Dome Testing
      • Friction and Friction Testing
      • High Strain Rate Testing
      • Delayed Cracking (Hydrogen Embrittlement)
      • Camera Considerations for DIC Evaluations
    • Formability
      • Formability Overview
      • Forming Modes
        • Stretching
        • Bending
        • Drawing
      • Forming Limit Curves (FLC)
        • Circle Grid Strain Analysis (CGSA)
        • Non-Linear Strain Paths (Stress-Based FLCs)
      • Engineering Stress-Strain vs. True Stress-Strain
      • Global vs Local Formability
      • Necking
      • True Fracture Strain
      • Shear Fracture
      • Formability Evaluations of AHSS
    • Springback
      • Springback Overview
      • Correcting Springback
    • Cutting, Blanking, Shearing & Trimming
      • Cutting, Blanking, Shearing & Trimming Overview
      • Laser Blanking
      • Shear Affected Zone
    • Tooling and Die Wear
      • Tooling and Die Wear Overview
      • Lubrication
    • Coil Processing: Straightening & Leveling
      • Coil Processing: Straightening and Leveling Overview
    • Press Hardened Steels Primer
      • PHS and PQS Overview
      • PHS Production Methods
      • PHS Simulation
      • PHS Tailored Products
      • PHS Grades
      • Coatings for PHS
      • PHS Automotive Applications and Usage
    • Cold Form vs Hot Form
      • Cold Form vs Hot Form overview
    • Tailored Products
      • Tailored Products Overview
      • PHS Tailored Products
    • Tube Forming
      • Tube Forming Overview
    • Hydroforming
      • Hydroforming Overview
    • Roll Forming
      • Roll Forming Overview
    • Simulation
      • Simulation Overview
      • Simulation Inputs
    • Structural Performance
      • Structural Performance Overview
      • Crash Management
      • Fatigue
    • Press Requirements
      • Press Requirements Overview
      • Press Tonnage Predictions
    • Quality Control
      • Quality Control Overview
    • Industry 4.0 and AHSS Applications
      • AHSS Applications of Industry 4.0
    • Additive Manufacturing
      • Additive Manufacturing Overview
  • Joining
    • Resistance Spot Welding
      • RSW Basics
        • Resistance Spot Welding Basics
        • RSW of AHSS
          • RSW Parameter Guidelines
            • Electrode Geometry
            • Coating Effects
          • Manufacturing Issues
        • RSW of Dissimilar Steel
          • Higher than Expected Strengths
        • Pulsing
        • Automotive Welding Process Comparisons
        • Paint Baking Strength Increase
      • RSW Masterclass
        • In-Situ Weld Heat Treatment
        • Cross-Tensile Strength Improvement
        • RSW of 22MnB5
        • RSW of 3 Sheet Stack-Up
        • RSW of 4 Sheet Stack-Up
        • RSW of 5 Sheet Stack-Up
        • Higher than Expected Strengths
        • RSW bonding
      • RSW Mechanical Testing
        • Weld Fracture Modes
        • Fatigue of RSW Joints
        • Hydrogen embrittlement
        • Analyze Hydrogen Cracking Susceptibility
        • High Strain Rate Testing
      • RSW Modelling
        • RSW Modelling Overview
        • RSW of 3T Sheet Stack-Up
        • RSW Failure Prediction
        • Modelling RSW of AHSS
      • Liquid Metal Embrittlement
        • LME Study
        • LME Simulation during RSW
        • Easy Steps for LME Mitigation
        • Component Scale Avoidance of LME
    • Arc Welding Processes
      • Gas Metal Arc Welding
        • Gas Metal Arc Welding
        • Arc Welding Basics
        • Fatigue of GMAW-P Lap Joints
        • Role of Coatings in Defect Formation AHSS welds
        • HAZ Properties of GMAW DP 600
        • GMAW of Dissimilar AHSS Sheets
        • Repairability
        • Wire-arc Addictive Manufacturing
        • Automotive Welding Process Comparisons
      • Gas Metal Arc Welding Masterclass
        • MIG Brazing
        • Coating-related Defect Avoidance
    • Laser Welding
      • Laser Welding Basics
        • Laser Welding Applications
        • Substituting RSW by Laser Welding
        • Automotive Welding Process Comparisons
      • Laser Welding Masterclass
        • PHS Hardening Time Influence
        • Effect GA-Coating Weight PHS
        • Hot cracking during AHSS welding
        • Life Cycle Assessment of Welding
    • Other Automotive Joining Processes
      • Adhesive and Mechanical Joining
        • Mechanical Joining
      • Projection Welding
        • HS Boron Methodologies
      • Friction Welding
        • Friction Welding Basics
        • Friction Stir Welding of Thin Steel Sheets
      • Magnetic Pulse Welding
        • Magnetic Pulse Welding Basics
      • High Frequency Tube/Pipe Welding
        • HF Welding Parameters and Procedures
        • High FrequencyTube/Pipe Welding Basics
    • Joining Dissimilar Materials
      • Key Issues: RSW Steel and Aluminium Joints
        • Physical Considerations in Dissimilar Material Joining
      • Direct RSW of Aluminium to Steel
        • Aluminium/Steel Using Cover Plates
        • REM of Aluminium/Steel
        • Ultrasonic Assisted RSW
        • Capacitive Discharge Welding
        • Aluminium/Steel Using Interlayer
        • Process, Microstructure and Fracture Mode of Thick Stack-Ups of Aluminum Alloy to AHSS Dissimilar Spot Joints
      • Solid State Welding of Steel to Aluminum
      • Joint Strength in Laser Welding of DP to Aluminium
  • AHSS Insights Blog
  • Search
  • Tutorials
  • Help
  • Subscribe

A-30

Citation:

A-30.  ASTM International (ASTM), ASTM A1030/A1030M, “Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products”.

Search

> View Steel Grades

World Steel Association AISBL

Registered office: Avenue de Tervueren 270 - 1150 Brussels - Belgium T: +32 2 702 89 00 - E: steel@worldsteel.org

Beijing office
C413 Office Building - Beijing Lufthansa Center - 50 Liangmaqiao Road Chaoyang District - Beijing 100125 - China T: +86 10 6464 6733 - F: +86 10 6468 0728 - E: china@worldsteel.org

 

© 2024 worldsteel |Terms of use |Privacy policy | Cookie policy | Sitemap | VAT Number BE 0406.597.373

WorldAutoSteel

 U.S. Office
825 Elliott Drive
Middletown, OH 45044 USA
T: +1 513 783 4030 -
E: steel@worldautosteel.org

 © 2024 WorldAutoSteel

worldsteel.org | steeluniversity.org | constructsteel.org | worldstainless.org


WorldAutoSteel News
Sign up to receive our e-newsletter.