Citation:

M-19. J. Min, TB. Stoughton, J.E. Carsley, and J. Lin, “An improved curvature method of detecting the onset of localized necking in Marciniak tests and its extension to Nakazima tests,” International Journal of Mechanical Sciences, 2017, 123, p. 238, doi.org/10.1016/j.ijmecsci.2017.02.011.

Related Posts
Filter by
Post Page
Testing and Characterization main-blog Blog homepage-featured-top Laser Welding Simulation
Sort by

Steel E-Motive Addresses Autonomous Vehicle Safety Challenges

As robotaxi companies in the USA prepare to launch their

8

High Strain Rate Testing

Dynamic tensile testing of sheet steels is becoming more important due to the need for more optimized vehicle

8

More Reveals of the Steel E-Motive Autonomous Vehicle Demonstration

WorldAutoSteel has a 30-year legacy of steel demonstration all the way back to the

8

What are 3rd Gen AHSS?

One of the tasks we took great care in completing during the update of the AHSS Application Guidelines was to

8

Improvement of Delayed Cracking in Laser Weld of AHSS and 980 3rd Gen AHSS

This article is a summary of the paper entitled, “IMPROVEMENT OF DELAYED CRACKING IN LASER WELD OF AHSS AND

8

Bend Testing

Tensile testing cannot be used to determine bendability, since these are different failure modes. Failure in bending

8

Improvement by Metallurgical Approaches

The Hole Expansion test (HET) quantifies the edge stretching capability of a sheet metal grade having a specific

8

A New Global Formability Diagram

Bubble chart. Banana diagram. Steel strength ductility diagram—it’s been called a lot of things over the years. But t

8