J-19

Citation:

J-19. P.O. Judt, A. Ricoeur, and G. Linek, “Crack paths at multiple-crack systems in anisotropic structures: simulation and experiment,” Procedia Materials Science, Volume 3, 2014, Pages 2122-2127, doi.org/10.1016/j.mspro.2014.06.343.

Filter by

Post Page

Laser Welding Testing and Characterization RSW Joint Performance Testing Production Managers Tool & Die Professionals homepage-featured-top main-blog Steel Grades AHSS Blog 1stGen AHSS 3rdGen AHSS 2ndGen AHSS Metallurgy Lower Strength Steels Conventional HSS Resistance Welding Steel to Aluminium Citations

Sort by

Improvement of Delayed Cracking in Laser Weld of AHSS and 980 3rd Gen AHSS

This article is a summary of the paper entitled, “IMPROVEMENT OF DELAYED CRACKING IN LASER WELD OF AHSS AND

Hot cracking investigation in HSS laser welding with multi-scale modelling approach

This article summarizes the findings of a paper entitled, “Hot cracking investigation during laser welding of h

Delayed Cracking (Hydrogen Embrittlement)

Delayed cracking caused by hydrogen embrittlement results in decreased toughness, ductility, and load-bearing

Analyze Hydrogen Induced Cracking Susceptibility in Resistance Spot Welds

This articles summarizes a paper entitled, “New Test to Analyze Hydrogen Induced Cracking Susceptibility in

Stronger AHSS Knowledge Required for Metal Stampers

This month’s blog was contributed by

Talk Like a Metallurgist

Process, Microstructure and Fracture Mode of Thick Stack-Ups of Aluminum Alloy to AHSS Dissimilar Spot Joints

This article summarizes a paper entitled, “Process, Microstructure and Fracture Mode of Thick Stack-Ups of

L-62

Citation: L-62. Linlin Jiang, Kyle Kram, and Chonghua Jiang,

G-4

Citation: G-4. H. Gao, G. Agarwal, M. Amirthalingam, M. J. M.

Bend Testing

Tensile testing cannot be used to determine bendability, since these are different failure modes. Failure in bending

Citation:

Submit a Comment Cancel reply

Search